Home›Guides›By vehicle›VW Golf R
By vehicle · Volkswagen
VW Golf R performance parts
Exhaust, suspension, wheel spacers and drivetrain for the Golf R, from the Golf 6 R to the Golf 8.5 R. Each generation comes in several versions: before every order, we check the right reference and the Swiss road approval.
Identify your Golf R
- Golf 6 R: 2.0 TSI with 270 hp (256 hp in some markets), no particulate filter.
- Golf 7 R (pre-facelift): 2.0 TSI with 300 hp, no particulate filter.
- Golf 7.5 R (facelift): 310 hp without particulate filter, then 300 hp with a petrol particulate filter (OPF).
- Golf 8 R and 8.5 R: with a petrol particulate filter (OPF).
Three more details change the reference: hatchback or estate (Variant), with or without DCC adaptive damping, manual or DSG gearbox.
Exhaust
- Without OPF (Golf 6 R, 7 R, 7.5 R 310 hp): a cat-back system replaces the exhaust after the catalytic converter.
- With OPF (7.5 R 300 hp, 8 R, 8.5 R): the system fits after the particulate filter, which stays in place. The filter dampens part of the sound.
- Resonated or not: Milltek offers both. The resonated version usually limits motorway drone.
- Valved: Grail, Hurricane and EGO-X offer valved systems that switch between a discreet and a louder sound.
Brands for the Golf R: Milltek, Bastuck, Hurricane, Grail, EGO-X and Bull-X (HG-Motorsport).
On Swiss roads, the system must be approved for the exact version of your Golf R, and a valved system must keep a control that complies with its approval. Removing or disabling the catalytic converter or the OPF is illegal on public roads.
Suspension
If your Golf R has DCC (adaptive damping), this is the first choice to make:
- Keep DCC: KW DDC Plug & Play coilovers, which keep the driving modes.
- Replace DCC: KW V1, V2 and V3 with a deactivation kit included depending on the reference, or ST XA and XTA with an optional deactivation kit.
- Other options: KW height-adjustable springs (Golf 7 R), ST and AP lowering springs, AP sport suspension kit (Golf 6 R). DCC compatibility depends on the reference.
- Track: KW V3 and V4 Clubsport.
- Bushes: Powerflex polyurethane.
For up to 40 mm of lowering, measured from the lowest height in the type approval or CoC, you need a fitness declaration valid for the vehicle and a confirmation of correct fitting. Beyond that, further documents are needed, in particular a DTC or FAKT report. The modification must be declared to the cantonal road traffic office, which inspects it.
See suspension for the Golf R · Compare coilovers
Wheel spacers
The Golf R uses a 5x112 bolt pattern and a 57.1 mm centre bore. Powertech spacers come in bolt-on versions (A1, A2) or through-bolt versions (DZX, DZX1, AZX, DAX), which need longer bolts.
In Switzerland, widening the track usually requires a DTC report. Our spacers are offered with or without a DTC report: without it, they are not road legal.
See wheel spacers. Tell us about your Golf R and the widening you want: we will send you the right reference.
Also for the Golf R
- Drivetrain: Sachs single-mass flywheel and clutch kits for manual Golf 6 R and Golf 7 R.
- Bodywork: parts from Maxton Design and Rieger. A material certificate alone is not a Swiss road approval.
- Safety: AST roll cages for the Golf 6 R and Golf 7 R.
Before you order
- Generation and power (see above).
- Hatchback or estate.
- With or without DCC.
- Manual or DSG.
- With or without OPF.
Send us these details, or a copy of your vehicle registration document with personal data hidden: we will check the reference and the Swiss documents available.