Home›Guides›Sports suspension and chassis
Suspension
Sports suspension and chassis
Springs, dampers, anti-roll bars and bushes, working together with the tyres: they shape a car's handling, comfort and ride height. We offer everything from simple lowering spring kits to adjustable coilovers, by KW, ST Suspensions and AP Suspensions (three brands of the German KW automotive group) and TEIN (Japan), plus Powerflex bushes (United Kingdom). H&R and Bilstein are available on request.
Which solution for which goal?
- Lowering springs: a simple way to lower the car by a fixed amount, usually keeping the original dampers if they are compatible and in good condition.
- Sports suspension kit: lowering springs with matched dampers, for a fixed drop and damping calibrated for the vehicle.
- Coilovers: replace springs and dampers. Ride height is adjustable and, depending on the range, damping too, in rebound and/or compression.
- Height-adjustable springs (HAS): adjustable height while keeping the original dampers. On compatible vehicles, electronic damping control is retained.
- Air suspension lowering links: alter the signal sent by the original system's height sensors to lower the body.
- Polyurethane bushes: limit the deflection of the mounts for more precise wheel location. Depending on their stiffness and location, they can transmit more vibration.
- Anti-roll bars: limit body roll and adjust cornering balance. On request.
What really changes
- Handling: a suitable suspension reduces body movement and makes the car more precise to drive. Set too low, it can actually make handling worse.
- Comfort: depends on spring rates and damper valving. Some coilovers let you adjust damping to suit how you drive.
- Electronic damping: depending on the vehicle, some solutions keep the original electronic settings, others need a compatible system.
- After fitting: check and correct the alignment if needed, check the headlights and, depending on the vehicle, recalibrate driver-assistance sensors or cameras. Also budget for the inspection fee.
Lowering in Switzerland: the rules
- Lowering must be reported to the cantonal road traffic office and inspected before the car goes back on the road. Once approved, it is entered in the vehicle registration document.
- Up to 40 mm, measured from the lowest height in the type approval or CoC: you need a declaration of suitability valid for the vehicle and confirmation of proper fitting. A German TÜV report alone is not a substitute.
- More than 40 mm: you need a declaration of suitability from the vehicle manufacturer, or a guarantee from the business doing the conversion, backed by a report from a recognised body such as DTC or FAKT.
- Coilovers: the setting must stay within the approved range. The fitter measures the distance from wheel centre to wheel arch edge before and after lowering.
- Air suspension links: lowering by altering the height signals requires proof from a recognised test body, even below 40 mm.
- Where a reference has a Swiss declaration of suitability, we supply it. Send us a copy of your vehicle registration document with personal data hidden: we check the right reference before you order.