Home›Guides›Suspension›KW and ST height-adjustable springs (HAS)
Suspension
KW and ST height-adjustable springs (HAS)
Height-adjustable springs, called HAS by KW, replace the original springs and use threaded spring seats to set the ride height, while keeping the original dampers. On compatible vehicles with factory electronic dampers, the electronic damping control is retained. We offer references from KW and ST Suspensions, plus H&R on request.
Who are they for?
- Cars with electronic damping (Audi S and RS, Mercedes-AMG, BMW M, Porsche...), when you want to lower without losing the damping modes.
- Anyone who wants to choose their ride height while keeping the original dampers.
What really changes
- Height: adjustable within a range defined for each vehicle. On some references, the drop can exceed 40 mm. The exact range is shown on each product page.
- Settings: the threaded seats adjust height, not stiffness. Damping remains as standard, with its electronic modes where fitted.
- Original height: on a car with factory sports suspension, the drop achieved may be smaller than the stated value.
- Kit contents: springs and height adjusters, with matching bump stops and dust protection depending on the reference.
Making the right choice
- Exact version: engine, drivetrain, axle loads and type of original suspension determine the reference. Some kits are only for cars with electronic damping, others for versions without.
- Dampers: they are kept, so they must be in good condition.
- Other needs: to also adjust damping or go lower, choose coilovers. For a fixed height at lower cost, choose lowering springs.
- Fitting: by a professional, with alignment check and correction, headlight check and, depending on the vehicle, recalibration of driver assistance systems.
Road approval in Switzerland
- Height-adjustable springs must be reported to the cantonal road traffic office and inspected before being entered in the vehicle registration document. The professional measures the distance between wheel centre and wheel arch edge, front and rear, before and after fitting.
- For up to 40 mm, measured from the lowest height in the type approval or CoC, you need a declaration of suitability valid for the vehicle and confirmation of proper fitting. Beyond that, you need a declaration from the vehicle manufacturer, or a guarantee from the professional backed by a DTC or FAKT report.
- Where a reference has a Swiss declaration of suitability, we supply it. Send us a copy of your vehicle registration document with personal data hidden: we check the right reference before you order.