Skip to main content
English

Home›Guides›Suspension›ST, AP and TEIN lowering springs

Suspension

ST, AP and TEIN lowering springs

Lowering springs replace the original springs to lower the car by a fixed amount, keeping the dampers. A simple solution, usually cheaper to buy than a complete suspension kit. We offer references from ST Suspensions and AP Suspensions, two brands of the German KW automotive group, and TEIN (Japan), plus H&R and Bilstein on request.

What really changes

  • Height: fixed drop, sometimes different front and rear. Our references average around 30 mm, up to 60 mm on some applications. The result depends on the original height and suspension: a car that already has a factory sports suspension will drop less.
  • Handling: a lower centre of gravity and a suitable spring rate limit body roll and make the car more precise to drive, as long as enough suspension travel remains.
  • Comfort: depends on the spring rate, the dampers and the remaining travel. Some references favour everyday comfort, others a firmer feel.
  • Dampers: many lowering springs are designed to keep the original dampers, if they are compatible and in good condition. For a large drop or worn dampers, choose dampers designed for lowering springs, such as Bilstein B8 on request, or a complete sports suspension kit.

Making the right choice

  • Exact version: engine, drivetrain, body style and maximum axle loads determine the reference. The kit's load limits must match your vehicle.
  • Electronic damping: some references are compatible with the original electronic dampers. We check this for your exact version.
  • Adjustable height: lowering springs give a fixed height. To adjust it, choose height-adjustable springs (HAS) or coilovers.
  • Kit contents: number of springs, included accessories and any bump stop adjustments vary by reference.
  • Fitting: by a professional, with the alignment checked and corrected as needed, and the headlight aim checked.
  • Cut original springs: springs that have been cut, ground or heated are prohibited on Swiss roads.

Road approval in Switzerland

  • Lowering springs must be reported to the cantonal road traffic office and inspected before being entered in the vehicle registration document.
  • Up to 40 mm, measured from the lowest height in the type approval or CoC, not from the height before fitting: a declaration of suitability valid for the vehicle and confirmation of proper fitting. Beyond that: a declaration from the vehicle manufacturer, or a guarantee from the professional backed by a DTC or FAKT report.
  • Where a reference has a Swiss declaration of suitability, we supply it. Send us a copy of your vehicle registration document with personal data hidden: we check the right reference before you order.

Best-covered models