Skip to main content
English

Home›Guides›Brakes›Brake fluid

Brakes

Brake fluid: choosing the right one and knowing when to change it

Brake fluid transmits pedal pressure to the calipers. Often neglected at service time, it plays an essential role in reliable braking, especially as temperatures rise. Over time it absorbs moisture from the air, which lowers its boiling point: on a mountain pass descent or on track, old fluid can boil and form vapour bubbles. The pedal then goes soft, or even sinks to the floor.

The standards

  • DOT 3, DOT 4 and DOT 5.1: glycol-based, with different requirements for boiling point and viscosity. These are minimum requirements, not a product's actual performance. They are generally miscible, but mixing can degrade performance. The standard specified by the manufacturer comes first.
  • DOT 4 LV: low-viscosity DOT 4, for ABS and ESP systems that need fast fluid flow, especially in the cold. A racing DOT 4 or a DOT 5.1 does not automatically replace it.
  • DOT 5: silicone-based, never to be mixed with glycol-based DOT fluids. Despite its name, it is chemically different from DOT 5.1 and only suits systems designed for it.
  • Warning: glycol-based DOT fluids must not be mixed with DOT 5 silicone or with mineral hydraulic fluids. Use only the specified type.
  • Boiling points: the dry value applies to new fluid. The wet value is measured after a standardised water uptake and is used to compare ageing fluids.

Making the right choice

  • Specification: first follow the standard given by the manufacturer (often on the reservoir cap or in the service book).
  • Sporty driving and track: a high boiling point gives more thermal margin. Even so, check the viscosity and specifications of your vehicle. With intensive use, checks and changes may be more frequent.
  • Hydraulic clutch: some vehicles share one reservoir for brakes and clutch, others have a separate circuit. Always use the specified fluid.
  • Quantity: allow enough fluid for the change and a full bleed, as advised by the manufacturer or workshop.

When to change it

  • Replacement: follow the manufacturer's interval, often two years. With intensive use or after heavy track sessions, check the fluid's condition and adjust the interval.
  • Check: a workshop can measure the boiling point or estimate the water content. Do not wait for the official vehicle inspection: stick to the manufacturer's schedule.
  • Brake lines or calipers changed: the circuit has been opened, so it must be bled with new fluid.

Fitting and precautions

  • Bleeding: by a professional. Some vehicles need an ABS/ESP procedure with a diagnostic tool.
  • Paintwork: glycol-based fluid attacks paint: rinse any splash with water immediately.
  • Storage and disposal: keep bottles tightly closed, as an open bottle also absorbs moisture. Used fluid goes to a collection point, never down the drain.

Available on request

We offer Motul brake fluids on request. Send us the make, model and year of your vehicle: we will recommend the right fluid. See also pads and discs.