Home›Guides›Suspension›ST and AP sports suspension kits
Suspension
ST and AP sports suspension kits
A sports suspension kit replaces the original springs and dampers with a set matched to the vehicle. It pairs lowering springs with sports dampers, for a predefined drop. We offer kits from ST Suspensions and AP Suspensions, two brands of the German KW automotive group, plus H&R and Bilstein on request.
Who are they for?
- Cars with tired original dampers: springs and dampers are replaced in one go.
- Anyone who wants matched sports springs and dampers with a fixed height, without going as far as coilovers.
What really changes
- Height: predefined, shown on each product page. Most of our kits lower by 20 to 40 mm, a few references go further.
- Dampers: sports dampers with preset damping, designed for the kit's springs and the intended drop.
- Handling: less body movement and more precise driving. Comfort depends on each kit's tuning and the vehicle.
- Original height: on a car with factory sports suspension, the drop achieved may be smaller than the stated value.
Making the right choice
- Exact version: engine, drivetrain, body style, axle loads and suspension layout determine the reference.
- Electronic damping: these kits use conventional dampers. To keep electronic control, choose compatible height-adjustable springs (HAS) or coilovers.
- Self-levelling suspension: depending on the reference, the kit is not compatible with this system, or the system must be adjusted after fitting.
- Settings: damping is preset and height usually fixed. Some ST kits allow a small adjustment at the rear. To adjust height or stiffness freely, choose coilovers.
- Kit contents: springs and dampers. Top mounts, bearings and bump stops are not always included: replacing them depends on their condition.
- Fitting: by a professional, with alignment check and correction, headlight check and, depending on the vehicle, adjustment of the relevant electronic systems.
Road approval in Switzerland
- A sports suspension kit must be reported to the cantonal road traffic office and inspected before being entered in the vehicle registration document.
- For up to 40 mm, measured from the lowest height in the type approval or CoC, you need a declaration of suitability valid for the vehicle and confirmation of proper fitting. Beyond that, you need a declaration from the vehicle manufacturer, or a guarantee from the professional backed by a DTC or FAKT report.
- Where a reference has a Swiss declaration of suitability, we supply it. Send us a copy of your vehicle registration document with personal data hidden: we check the right reference before you order.