Skip to main content
English

Home›Guides›Performance wheels for cars and motorcycles

Wheels and spacers

Performance wheels for cars and motorcycles

New wheels change not only the look of the car but also its unsprung weight, inertia and sometimes its handling. We offer wheels from BBS, OZ Racing, Barracuda, Corspeed, Team82 and Sigma, mostly 19 to 22 inches for cars, plus OZ forged aluminium and magnesium wheels for motorcycles.

Construction types

  • Cast: aluminium is poured into a mould. The most common construction, with a good balance of price and toughness.
  • Flow-forming: the centre is cast, then the barrel is shaped hot under pressure by rollers. The barrel gains strength and can be lighter than a comparable cast wheel. At BBS: CI-R, CC-R and CH-R II.
  • Forged: the alloy is shaped under very high pressure, then machined. Excellent strength-to-weight ratio, often lighter than an equivalent cast wheel. Usually the most expensive construction.
  • Wheel spacers: to move the wheels outwards without changing them. Compatibility and Swiss documents must be checked.

What really changes

  • Weight and inertia: a lighter wheel can improve how the suspension works and the response when accelerating and braking. The result depends on the wheel and tyre together.
  • Diameter: for a comparable outer diameter, a larger wheel needs a lower-profile tyre. Sharper steering, but less comfort and more sensitivity to impacts on rough roads.

Making the right choice

  • Dimensions: bolt pattern, centre bore, width, diameter and offset (ET) must suit the vehicle. ET sets the wheel's position relative to the hub. If the bore is larger, a suitable centring ring may be needed depending on the manufacturer's system.
  • Brakes: the wheel design and diameter must clear the calipers.
  • Load: each wheel must carry at least half the maximum permitted axle load.
  • Tyres: sizes, load and speed ratings suited to the vehicle. Outer diameter, rolling circumference and wheel-tyre combination must also meet the requirements.
  • Bolts and TPMS: bolts or nuts matching the seat, thread and specified length. With direct TPMS, compatible sensors and valves are needed.
  • Contents: bolts, rings, valves and sensors are only included if the product page says so.

Motorcycle wheels

  • OZ: Piega and Gass in forged aluminium, Cattiva in forged magnesium. Mainly for Ducati, BMW S 1000 RR, Yamaha, Suzuki, Aprilia and Kawasaki.
  • Compatibility: check axles, bearings, spacers, disc mounts, ABS and, at the rear, the sprocket carrier.

Road approval in Switzerland

  • Wheels already approved for your vehicle do not need a new inspection. Others must be reported and inspected with the corresponding documents. The same applies to motorcycles: a non-approved wheel needs a valid declaration of suitability and an inspection.
  • Send us a copy of your vehicle registration document with personal data hidden: we check the reference, the available documents and the steps before you order.

Our wheel brands