Home›Guides›Brakes›DBA brake discs
Brakes
DBA brake discs
The disc absorbs the heat produced by every stop, then dissipates it. Its composition, ventilation and design affect how well it handles repeated braking, sheds heat and withstands thermal stress. DBA discs (Australia) are designed to replace the original discs on compatible vehicles, with no change to the mountings. In Switzerland, their road legality also depends on their construction and approval. Available on request.
The three DBA ranges
- Street Series: OE replacement for everyday driving, with En-Shield anti-corrosion coating or T2 slotting depending on the reference.
- 4000 Series: one-piece disc in high-carbon cast iron, heat-treated, for braking performance above OE level. Kangaroo Paw ventilation on equipped references: DBA quotes up to 20% more cooling than a conventional straight-vane design.
- 5000 Series: two-piece, with a cast iron ring and an aluminium hat. Reduces unsprung weight depending on the application and limits heat transfer to the hub. Rings can be replaced on their own when the hat is reusable, following DBA instructions.
Finishes
- HD: plain surface.
- T2: Street Series slotting.
- T3 (S): tri-symmetrical slotting on 4000 and 5000 Series, recommended by DBA for demanding sporty use.
- XS and XD: XS drilled and slotted, XD drilled and dimpled.
- Track: DBA recommends T3 rather than the drilled XS and XD finishes, which are not recommended for track or heavy off-road use.
What really changes
- Heat resistance: better heat dissipation and a more stable material under high heat.
- Pad-disc contact: slots clear debris and gases from the friction surface, for more consistent braking.
- Thermal monitoring: on equipped 4000 and 5000 discs, three paint bands change colour permanently when the disc exceeds certain temperature thresholds for a prolonged time.
Making the right choice
- Exact version: diameter, thickness, disc height, caliper type and original brake options determine the reference.
- Pads: choose pads compatible with the disc and your use.
- Minimum thickness: every disc has a wear limit. Once reached, it must be replaced, even if the surface still looks fine.
- Bedding-in: new discs and pads are bedded in following the manufacturer's instructions.
- Fitting: in pairs on the same axle, checking hubs, run-out and tightening torques.
Road approval in Switzerland
- We check the conformity of the replacement disc, in particular its ECE R90 approval where it applies. A disc with different dimensions, construction or material from the original requires a specific check of the documents and steps with the cantonal road traffic office.
- Send us a copy of your vehicle registration document with personal data hidden: we identify your original disc and suggest the right DBA reference.