Skip to main content
English

Home›Guides›Suspension›KW, ST, AP and TEIN coilovers

Suspension

KW, ST, AP and TEIN coilovers

A coilover replaces the original springs and dampers with a height-adjustable unit. It lets you set the ride height within a defined range and, depending on the range, adjust damping too. We offer references from KW, ST Suspensions, AP Suspensions and TEIN, plus H&R and Bilstein on request.

Choosing your range

  • AP Suspensions: adjustable height, preset damping. The entry-level coilover from the KW automotive group.
  • ST X, XA and XTA: the X has preset damping, the XA adds rebound adjustment, and the XTA adds sportier springs and Uniball top mounts that, depending on the vehicle, allow camber adjustment.
  • KW V1, V2 and V3: the V1 has damping preset by KW, the V2 is adjustable for rebound, and the V3 separately for rebound and compression.
  • KW V4 and V5: for demanding road use, with damping adjustable in three ways (V4) or four ways (V5).
  • KW Clubsport: designed for sporty use and track days, with top mounts and settings adapted to the model.
  • KW DDC: electronic damping. The Plug & Play version keeps the original control and driving modes on compatible vehicles. The DDC ECU version adds KW control to vehicles without it.
  • TEIN (Japan): adjustable height, with preset or adjustable damping depending on the range.
  • H&R and Bilstein (Germany): coilovers on request. We tell you the right range and the documents available for your vehicle.

Cars with electronic damping

  • About 700 of our references are designed for cars with factory electronic damping (DCC, EDC, PASM...).
  • With a conventional coilover, the factory electronic damping no longer works. Depending on the reference, a deactivation kit is included: it disables the electronic damper control and prevents the related error messages, without disabling the control unit's other functions.
  • To keep electronic damping, you need a KW DDC Plug & Play or height-adjustable springs (HAS).

Making the right choice

  • Height and damping: all our coilovers are height-adjustable. Damping adjustment depends on the range.
  • Adjustment range: each kit has a lowering range set by the manufacturer. In Switzerland, the chosen height must also comply with the road approval documents. A German TÜV report alone is not enough.
  • Exact version: engine, drivetrain, body style and axle loads change the reference.
  • Use: for a sporty drop on a daily driver, AP, ST X and KW V1 cover most needs. ST XA and KW V2 or V3 add more adjustment. For regular track use, KW Clubsport is the best fit.
  • Kit contents: top mounts, accessories and deactivation modules are not always included. We check this with you.
  • Fitting: by a professional, with the alignment checked and corrected, and ride heights measured before and after for the inspection.

Road approval in Switzerland

  • A coilover must be reported to the cantonal road traffic office and inspected before it is entered in the vehicle registration document. The fitter measures the distance from wheel centre to wheel arch edge before and after fitting.
  • For up to 40 mm, measured from the lowest height in the type approval or CoC, you need a declaration of suitability valid for the vehicle and confirmation of proper fitting. Beyond that, you need a declaration from the vehicle manufacturer, or a guarantee from the professional backed by a DTC or FAKT report.
  • Where a reference has a Swiss declaration of suitability, we supply it. Send us a copy of your vehicle registration document with personal data hidden: we check the right reference before you order.

Best-covered models