Skip to main content
English

Bushings and Ball Joints

Can't find your part?

Our references are constantly being updated.

Contact us

Bushings and Ball Joints

Bushings and ball joints connect the suspension arms to the chassis and wheel hubs. Originally, bushings are made of soft rubber to filter noise and vibrations; under heavy load, they deform, altering camber and alignment angles, leading to vague steering. With age, they crack, increasing this vagueness. Two solutions exist. Polyurethane, which is harder than rubber, limits these deformations while still filtering some vibrations: it is suitable for both road and sporty driving. The spherical joint (uniball), fully metallic, eliminates any deformation and offers perfect guidance, at the cost of transmitting noise and vibrations to the chassis: it is intended for track use. Selection criteria include location (arms, cradle, stabilizer bar, tie rods), hardness of polyurethane, and intended use. For uniball joints on a registered vehicle, check their acceptance for technical inspection. This category mainly concerns automobiles; on motorcycles, suspension joints primarily use bearings.